Key to icons
Video
Company news
Product news
Downloads
Application news
Technical Articles
Yokogawa - Test and Measurement
All articles from Yokogawa - Test and Measurement
Spectrum analyser with high wavelength range
The AQ6370C from Yokogawa combines accuracy and resolution with ultra-high dynamic range, comprehensive interfacing and ease of use.
News from Electronicstalk, 8 November 2010
Software boosts recording ability of Scopecorder
A utility option in Yokogawa's Xviewer software boosts the hard disk recording capability of the DL850 Scopecorder by allowing pre-analysis of waveform data while the acquisition is in progress.
News from Electronicstalk, 13 September 2010
Oscilloscopes for high-frequency power measurement
Yokogawa has revealed that the G4 power measurement option on its digital and mixed-signal oscilloscopes can be used to carry out high-frequency power measurements in switched-mode power supplies.
News from Electronicstalk, 30 June 2010
Yokogawa software conforms with IEC 62301 and EuP
Yokogawa's new standby power consumption measurement software conforms with the testing methods specified in the IEC 62301 standard and the European Energy-using Products (EuP) directive.
News from Electronicstalk, 23 April 2010
Sensors enable high-current measurement
A range of current sensors that allows the Yokogawa range of precision power meters to be used for measuring very high currents has been made available.
News from Electronicstalk, 19 February 2010
Yokogawa introduces optical spectrum analyser
The Yokogawa AQ6373 is an optical spectrum analyser designed to carry out measurements over the 350-1,200nm wavelength range, including the 380-780nm visible light spectrum.
News from Electronicstalk, 11 December 2009
Yokogawa releases range of digital oscilloscopes
The Yokogawa DLM6000 mixed-signal oscilloscope is the flagship product in a new range of high-performance digital oscilloscopes.
News from Electronicstalk, 15 October 2009
Yokogawa offers PON-version OTDR
The Yokogawa AQ7275 PON-OTDR is a passive optical network (PON) version of the company's AQ7275 portable, optical time-domain reflectometer (OTDR).
News from Electronicstalk, 23 September 2009
Smit implements Yokogawa analyser in test system
The Yokogawa WT3000 digital power analyser is at the heart of a test system being used by Smit Transformers NV to provide accurate measurement of power losses.
News from Electronicstalk, 28 August 2009
Yokogawa releases updated curve-tracer software
A new version of Yokogawa's curve-tracer software for semiconductor testing has been introduced for the company's GS610 source measure unit.
News from Electronicstalk, 6 August 2009
Digital meters test standby power to IEC 62301
The Yokogawa WT3000-2A and WT210 digital power meters are now certified to carry out the standby power tests specified in the IEC 62301 standard.
News from Electronicstalk, 14 July 2009
WT3000 can carry out interharmonics testing
The Yokogawa WT3000 digital power analyser equipped with IEC harmonics testing software complies with the latest EN standard on harmonics testing: EN61000-3-2:2006.
News from Electronicstalk, 8 May 2009
Yokogawa introduces AQ7275 series of OTDRs
Six models have been added to the Yokogawa AQ7275 series of optical time-domain reflectometers (OTDRs).
News from Electronicstalk, 26 March 2009
Yokogawa reveals handheld digital multimeters
Yokogawa has introduced the TY700 series, a range of handheld digital multimeters that combines accuracy, performance and reliability with functions for electronics and industrial applications.
News from Electronicstalk, 13 January 2009
Yokogawa launches mixed-signal oscilloscopes
The Yokogawa DLM2000 Series is a range of mixed-signal oscilloscopes (MSOs) that offer up to 500MHz bandwidth and 2.5GS/s sampling speed.
News from Electronicstalk, 10 November 2008
Compact unit monitors power quality
The compact size, high speed and accuracy of the WT500 make it suitable for quality-assurance purposes for manufacturers of power conversion equipment.
News from Electronicstalk, 25 July 2008
Reflectometer provides fast network tests
The AQ7275 offers excellent event separation capability and a dead zone of less than 800mm, to enable multiple-event detection even when events are close to one another.
News from Electronicstalk, 28 May 2008
Transport analyser meets new network needs
The ability to cleanly transmit data at 40Gbit+ line rates requires special optical modulation techniques, such as nonreturn-to-zero (NRZ) and optical duo binary (ODB).
News from Electronicstalk, 15 May 2008
Probe suits vehicle testing buses
The PBH1000 is robust enough for use in the in-vehicle test environment and will withstand maximum voltages of +/-100V (transient) and +/-35V.
News from Electronicstalk, 6 May 2008
Acquisition unit marries speed with isolation
PC-based system overcomes limitations of high-speed digitisers that lack the isolation, attenuation or bit resolution necessary for power electronics testing.
News from Electronicstalk, 21 April 2008
Featured articles

- Military connector production capacity expanded
To produce Amphenol's MIL-DTL-38999 Series I, II and III connectors in greater quantities, PEI-Genesis has expanded production capability at its 65,000ft2 European assembly facility in Southampton. - PEI-Genesis connectors can now be bought online
PEI-Genesis has upgraded its website with a personalisation facility called MyPei, which enables customers to shop online and access features such as technical advice and connector comparison charts

Browse by category
- Active components (13677)
- Passive components (3635)
- Design and development (10278)
- Enclosures and panel products (4033)
- Interconnection (3701)
- Electronics manufacturing, packaging (3503)
- Industry news (2108)
- Optoelectronics (1980)
- Power supplies (3057)
- Subassemblies (5679)
- Test and measurement (5835)