Teseq distributes PMM 9010 receiver
A Teseq product story
Edited by the Electronicstalk editorial team May 25, 2009
Teseq is distributing a 30MHz digital EMI/EMC receiver with flexible measurement-parameters on frequencies up to 6GHz.
Teseq is the exclusive North American distributor for PMM, a brand of Narda Safety Test Solutions srl, which manufactures the compact, modular PMM 9010 receiver.
The new PMM 9010 uses analogue-to-digital conversion and powerful digital-signal processing to prevent critical parts from aging, as this could degrade measurement accuracy.
The CISPR detectors, IF and RBW filters are all stable and feature lifetime calibration-free operation.
The receiver uses the Smart Detector function to provide fast scanning using only the peak detector.
As peaks that exceed the preset thresholds are found, they are immediately measured with the slower detectors before stepping to the next frequency, saving considerable time when compared with rescanning, especially for EUT (equipment under test) that is only operated for short periods of time, such as appliances and electric tools.
Fully compliant with the latest CISPR 16-1-1 standards - including the new RMS-AVG (root mean square-average) detector, APD (amplitude probability distribution) for testing above 1GHz as well as peak, average and quasi-peak modes - the new PMM 9010 is ideal for use in small labs as well as commercial test labs for any application that requires fast, reliable compliant measurements, including military and automotive.
The compact receiver weighs only 9lbs (4.082kg) and is useful in stand-alone systems and integrated as part of larger systems for manual, semiautomatic and fully automatic testing requirements.
Rechargeable internal batteries also provide enhanced portability for use in field-testing applications where power sources are scarce.
A fully compliant CISPR 14-1 click-meter option automatically evaluates the click rate N, applies the use of exceptions, if applicable, and provides click measurement using the upper quartile method with a full report that includes all mandatory data.
The PMM 9010 shows all click details and mandatory reporting parameters in real-time, with reports generated via the included PC software application.
The PMM 9010's Smart Measure feature, developed exclusively by Narda, speeds up the click test.
The 9010 can be configured as a single or four-channel click meter.
Most key components, including the A/D converter and RF signal generator, can be easily swapped in the field with factory-calibrated replacement modules.
The system firmware is easily field-upgraded, allowing the addition of new measurement features such as detectors, MIL-461 RBW filters or required measurement methods to maintain standards compliance.
The RF front-end is self-calibrated by a high-stability internal RF signal generator.
Providing 60 to 90dBuV in 0.1dB steps, the signal generator can work in tracking mode up to a frequency of 50MHz, enabling the PMM 9010 to be used as a scalar network analyser for characterising components, antennas and filters.
For debugging applications, the PMM 9010 can also perform spectrum-analyser functions with a high scan-speed of less than 100ms for full-span 9kHz to 30MHz at an IF resolution of 300kHz.
Not what you're looking for? Search the site.
Contact Teseq
Tel (UK)
Other Teseq stories
- Teseq digital receiver covers 10Hz to 6GHz range
Teseq has introduced the Narda PMM 9010, a fully digital receiver covering the frequency range 10Hz to 6GHz. - Teseq releases USB/RS232 electric field probes
Teseq is offering the PMM EP-600 and EP-601, two USB/RS232 electric field probes that benefit from a spherical symmetrical dipole configuration. - Teseq upgrades integrated immunity test program
Teseq has announced an upgrade to its AutoStar integrated immunity test management program. - Teseq catalogue provides product summaries
Teseq, a developer and provider of instrumentation and systems for EMC emission and immunity testing, has published a catalogue that summarising each product's features and benefits. - Teseq introduces input/output box
Teseq, a developer of instrumentation for EMC emission and immunity testing, has introduced the IOB 4000 input/output box for EUT (equipment-under-test) monitoring during EMC immunity testing.
Browse by category
- Active Components (11,590)
- Active Components (4)
- Analogue and Mixed-Signal ICs (1,729)
- Communications ICs (Wired) (1,800)
- Communications ICs (Wireless) (1,595)
- Discrete Power Devices (431)
- Memory Devices and Modules (769)
- Microprocessors, Microcontrollers and DSPs (2,081)
- Power-Supply ICs and Controllers (2,430)
- Programmable Logic Devices (609)
- Standard Logic Devices (142)
- Design and Development (9,651)
- Design and Development (1)
- Design and Development Hardware (1,046)
- Design and Development Software (4,676)
- Design Services (313)
- Embedded Software and Operating Systems (1,686)
- Intellectual Property Cores (1,568)
- Reference Designs (361)
- Electronics Manufacturing, Packaging (3,246)
- Enclosures and Panel Products (3,488)
- Enclosures and Panel Products (2)
- Fans and Blowers (229)
- Floor-Standing Racks, Cabinets, Enclosures (253)
- Gaskets, Seals and Screens (127)
- Handheld and Other Small Enclosures (143)
- Heatsinks and Thermal Management (203)
- Indicators and Audio (80)
- Instrument Cases, Benchtop, Wall-Mounting Enclosures (349)
- LCD Modules (493)
- Monitors (136)
- Other OEM Display Modules, Meters (241)
- Printers, Knobs, Bezels, Other Panelware (157)
- Rotary Controls, Joysticks etc (138)
- Switches and Keyboards (617)
- Touchscreens and Touch Sensors (313)
- Industry News (1,978)
- Interconnection (3,187)
- Antennas and Feeders (319)
- Boards and Backplanes (158)
- Cables and Wires (485)
- Interconnection (12)
- PCB Connectors (613)
- Plugs and Sockets (1,257)
- Terminals and Power (288)
- Optoelectronics (1,773)
- Passive Components (3,234)
- Capacitors (703)
- Circuit Protection Devices (512)
- Electromechanical Components (578)
- EMC Components (415)
- Frequency Control Components (445)
- Passive Components (1)
- Resistors (318)
- Transformers and Inductors (262)
- Power Supplies (2,591)
- AC/DC Power Supplies (1,085)
- Batteries and Chargers (255)
- DC/AC Inverters (80)
- DC/DC Convertors (938)
- OEM Power Supplies (0)
- Power Supplies (8)
- UPSs (225)
- Subassemblies (5,054)
- CompactPCI Boards, Assemblies (381)
- Embedded Computing and Control (1,386)
- Networking Hardware (966)
- PC-Compatible Boards, Assemblies (806)
- Subassemblies (1)
- VMEbus Boards, Assemblies (425)
- Wireless Communications (1,089)
- Test and Measurement (5,302)
- ATE Systems (393)
- Board-Level Instruments (560)
- Compliance Engineering (910)
- Sensors and Data Acquisition (936)
- Stand-Alone Instruments (2,047)
- Test Accessories (435)
- Test and Measurement (6)
