Saelig launches handheld Bluetooth barcode scanner

Saelig has introduced the CM-500W3 - a handheld 2.4GHz Class I Bluetooth barcode scanner designed for everyday use.

The CM-500W3 uses a linear CCD image sensor with a built-in 630nm red LED illumination source.

Its internal 32-bit microprocessor reads linear barcodes at 100 scan/sec at a distance of 2-10in.

The versatile the CM-500W measures 5 x 1.5 x 0.7in, weighs 2oz and features two keys (scan/clear), plus a beeper and LEDs to indicate read status.

With a USB cable attached, it becomes a 'plug and scan' scanner, while, without the USB cable, it functions as a memory or wireless scanner.

As a Bluetooth device, it can be programmed as a master or slave device to allow communication between a Windows PC, a mobile phone or a PDA for instant or delayed data entry.

The CM-500W3's built-in Li-polymer battery pack (3.7V, 420mAH) can be recharged via any USB port and the unit can read up to 15,000 scans before requiring a recharge.

The CM-500W3 can scan fine-pitch barcodes through translucent static bags.

The internal non-volatile memory can store up to 500 scans.

The CM-500W3 is configurable for time stamp and output data format, and can transmit data to a remote PC either in keyboard wedge mode as if typing on a keyboard, or in memory mode, whereby up to 500 scans are stored for batch entry.

Supported barcodes include Code 39, INT 25, Industrial 2 of 5, Matrix 2 of 5, Codabar(NW7), Code 93, Code 128,EAN 128, JAN/EAN/ UPC and fully RSS code (GS1 Databar ).

Back to top