Visit the Linear Technology Corp web site
Click on the advert above to visit the company web site

Product category: Power Supply ICs and Controllers
News Release from: Maxim Integrated Products | Subject: MAX16819/MAX16820, high-efficiency LED drivers
Edited by the Electronicstalk Editorial Team on 12 February 2007

MAX16819/MAX16820, high-efficiency LED
drivers

Request your FREE weekly copy of the Electronicstalk email newsletter. News about Power Supply ICs and Controllers and more every issue. Click here for details.

Maxim Integrated Products introduces the MAX16819/MAX16820, high-efficiency LED drivers for architectural, industrial, and automotive lighting applications.

Maxim Integrated Products introduces the MAX16819/MAX16820, high-efficiency LED drivers for architectural, industrial, and automotive lighting applications that make use of high-brightness light-emitting diodes (HB LEDs) The MAX16819/MAX16820 HB LED drivers require just one external MOSFET and only a few passive components to power LEDs that need up to 3A of current

Each device is capable of delivering from 1W to more than 25W of output power with up to 94% efficiency, while driving as many as six white LEDs connected in series.

Packaged in a tiny 3x3mm TDFN, these devices are the smallest LED drivers to provide LED-driver designs with such a wide power range.

Moreover, a high-voltage current-sense amplifier and up to 2MHz switching frequency further reduce space and component-count requirements.

These highly integrated devices minimise power dissipation, increase reliability, and reduce manufacturing costs, making them ideal for light sources such as the energy-efficient LED MR16 (an alternative to the traditional halogen MR16) and front and rear automotive lighting (RCL, DRL, and fog/low-beam lights).

Unlike the general-purpose buck controllers most commonly used to power HB LEDs, the MAX16819/MAX16820 LED drivers employ hysteretic control.

With this control technique, the drivers ensure rapid transient response and turn-on/-off times during PWM dimming, which translates into a wide dimming range (up to 5000:1) or the ability to dim at very high switching frequencies (up to 20kHz) using a dedicated DIM input.

Hysteretic control also offers a high level of input-supply rejection, as well as rapid response during LED dimming.

There is no control-loop compensation, which simplifies the design and further minimises component count.

High-side current sensing further differentiates these drivers from standard buck PWM controllers.

Because the voltage drop across the external sense resistor is only 200mV, the MAX16819/MAX16820 reduce power dissipation.

In addition, the high-side current sensing and integrated current-setting circuitry minimise the number of external components while delivering an LED current with +/-5% accuracy.

The MAX16819 and MAX16820 offer 30% and 10% LED current ripple, respectively, without the use of an output capacitor.

A wide input-voltage range (4.5V to 28V) allows the MAX16819/MAX16820 to be optimised for different input-voltage standards in architectural and ambient lighting, and ensures cold-start and load dump compliance in automotive applications.

These LED drivers are specified for the automotive temperature range (-40C to +125C) and are available in a lead-free, tiny, 3x3mm, 6-pin TDFN package with exposed pad.

Prices start at $0.58.

Maxim Integrated Products: contact details and other news
Email this article to a colleague
Register for the free Electronicstalk email newsletter
Electronicstalk Home Page

Search the Pro-Talk network of sites

Visit the Linear Technology Corp web site