LCR unveils single-phase COTS filters

A LCR Electronics product story

Edited by the Electronicstalk editorial team May 8, 2009

LCR Electronics, a manufacturer of EMI filters, electronic products and high-end enclosures, is offering a line of single-phase commercial off-the-shelf (COTS) filters operating over -40C to +85C.

The RoHS-compliant single-stage F9100 filters and the double-stage F9200 filters are suitable for high ambient environments or in applications with limited temperature rise requirements as found in the military, industrial and medical industries.

The 115/250VAC 50/60Hz filters are available with rated current from 5A to 35A in both general-purpose and low-leakage-current versions.

High potential voltage for both series is 1,450VDC line to line and 2,250VDC line to ground.

Depending on the filter current rating, insertion loss for the F9100 measured in a 50ohm system for frequencies starting at 50kHz up to 30MHz ranges from 5dB to 45dB in common mode and from 5dB to 35dB in differential mode.

Insertion loss for the F9200 ranges from 5dB to 80dB in common mode and from 10dB to 75dB in differential mode, under the same conditions.

Pricing for 100 pieces of the F9100 starts at USD12.50 (GBP8.30) per unit.