Product category: Sensors and Data Acquisition
News Release from: Adlink Technology | Subject: PXI-2010
Edited by the Electronicstalk Editorial Team on 26 July 2002
Multifunction card features versatile triggering
The PXI-2010 is a four-channel simultaneous 2Msample/s A/D and two-channel 1Msample/s D/A multifunction card from Adlink Technology
The PXI-2000 series combines the advantages of CompactPCI's ruggedised Eurocard architecture and VXI's intrachassis signalling to create a flexible and cost effective multifunction card for the instrumentation market. The PXI-2010 uses the latest carrier and daughter modular design concept, which separates the analogue circuitry and digital circuitry into two cards, thus it greatly reduces the signal noise generated by digital parts and increases the effective numbers of bits (ENOB) in data measurement.
This article was originally published on Electronicstalk on 26 July 2002 at 8.00am (UK)
Related stories
ETX module adds Serial ATA connections
The ETX-GLX is reckoned to be an ideal balance between computing performance and low power consumption
Express acquisition card hosts 96 analogue inputs
Analogue input data acquisition card combines high channel density with the high bandwidth of an x1 PCI Express bus interface
PXI products provide trigger and clock signals on the J2 bus of CompactPCI and maintain complete interoperability with CompactPCI.
The versatile trigger functions of PXI-2010 allow user to trigger data acquisition to gain valid information from fast-changing transient data.
This allows the PXI-2010 to acquire accurate high-bandwidth signal from ultrasonic systems, radars, sonar and high frequency transient signals.
Special intelligent timing control logic and data buffer management allows high-speed data I/O throughput at the same time, which enables accurate high-speed waveform generation and measurement with no time delay.
This makes the PXI-2000 series the ideal device for stimulus/response testing.
Calibrating the PXI-2010 is achieved with a simple software command to automatically adjust the offset and gain setting to achieve best data accuracy.
Multiple card synchronisation is done via a high-speed signal bus for trigger and clock transmission.
This interface allows multiple cards to be integrated into a system and provides card-to-card synchronisation.
The PXI-2010 is equipped numerous advanced features to make it an ideal device to measure high-speed signals and perform high-performance system testing.
Request a free brochure from Adlink Technology....
• Adlink Technology: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• NEW
• Electronicstalk Home Page
Related Business News
Nasa Uses Ni Labview Fpga To...
...Test Advanced Space Telescope. The James Webb Space Telescope , NASA's next-generation successor to the Hubble, has passed a crucial milestone toward its 2013 launch with the help of National Instruments LabVIEW FPGA.
Drs Technologies Reports Record Fourth Quarter...
...And Fiscal Year Results. Drs Technologies, Inc. today reported record financial results for the fiscal 2007 fourth quarter and year, which ended March 31, 2007.
NovAtel, Septentrio to Sell Galileo Receivers
The European Space Agency (ESA) has granted licenses to both NovAtel Inc. and Septentrio to sell Galileo/Giove-A receivers. Space Engineering received the license to sell Galileo antennas.
Taiwan stocks end down in biggest...
...drop in over 1 yr. Taipei, July 27 (Reuters) - Taiwan shares fell 4.22 percent on Friday to their lowest close in three weeks, marking their largest one-day percentage drop in more than a year, after a sell-off on Wall Street hurt big exporters such as TSMC .
Nippon Oil Aug refining seen flat, eyes Sudan crude
Tokyo, July 27 (Reuters) - Japan's top oil refiner Nippon Oil Corp. will keep its August processing volumes steady versus a year ago to meet summer gasoline demand and is seeking more Nile Blend crude to meet higher utility use.
Search the Pro-Talk network of sites
