ATX power supplies support 12 and 24V inputs: News from Wordsworth Technology

Note: A free brochure or catalogue is available from Wordsworth Technology on the products in this news release. Click here to request a copy.

New from Wordsworth Technology, the ACE-717CX and ACE-715VX are industrial-grade ATX power supplies with nominal input voltages of 24V and 12V DC, respectively. The 170W ACE-717CX power supply has an input voltage range of +19 to +32V DC and is rated at 8, 8 and 6A maximum at +5, +12, and +3.3V, respectively. The -12V and +5V are rated at 0.5 and 1A maximum, respectively.

The 157W ACE-715VX power supply has an input voltage range of +9 to +18V DC and is rated at 8, 7, 6, 0.5 and 1.5A maximum at +5, +12, +3.3, -12 and +5V, respectively.

Both power supplies have ripple and noise rated at less than 1% of each output at the rated load.

They also have higher than 70% efficiency and provide a TTL compatible power good signal.

Overvoltage/load protection and short circuit protection is also supported.

The dimensions of the power supplies are 97 x 39 x 198mm. Request a free brochure from Wordsworth Technology....

• Wordsworth Technology: contact details and other news
• Other news in DC/DC Convertors
• Email this news to a colleague
•
• RSS news feed for Wordsworth Technology
• RSS news feed for DC/DC Convertors
• Electronicstalk Home Page

News Release from: Wordsworth Technology Edited by the Electronicstalk Editorial Team on 7 October 2005

ATX power supplies support 12 and 24V inputs

New from Wordsworth Technology, the ACE-717CX and ACE-715VX are industrial-grade ATX power supplies with nominal input voltages of 24V and 12V DC, respectively.

Note: A free brochure or catalogue is available from Wordsworth Technology on the products in this news release. Click here to request a copy.

News Release from: Wordsworth Technology
Edited by the Electronicstalk Editorial Team on 7 October 2005