Product category: Stand-Alone Instruments
News Release from: Tektronix | Subject: RSA6100A series
Edited by the Electronicstalk Editorial Team on 07 September 2006
Analysers reveal previously unseen RF
signals
Real-time spectrum analysers combine performance, capture bandwidth and dynamic range to meet the needs of a broad range of cutting-edge digital RF applications.
The Tektronix RSA6100A series of real-time spectrum analysers claims an unmatched combination of real-time performance, capture bandwidth and dynamic range to meet the needs of a broad range of cutting-edge digital RF applications DPX waveform image processor technology transforms volumes of real-time data to produce a live RF spectrum presentation that reveals previously unseen RF signals and signal anomalies
This article was originally published on Electronicstalk on 12 Feb 2007 at 8.00am (UK)
Related stories
Real-time spectrum analyser is tester of the year
DesignVision 2007 Award for Test and Measurement Equipment goes to Tektronix RSA6100A Series real-time spectrum analyser.
Scopes and probes answer SATA test demands
The DSA70000 series offers more four-channel performance than any alternative oscilloscopes and are ideal for high-speed serial data applications.
Live RF is achieved by improving the spectrum measurement rate nearly 1000 times compared with the fastest swept spectrum and vector signal analysers (VSA).
The rapid expansion of digital RF applications has driven the measurement needs of many applications including radar, mobile communications, software defined radio (SDR), cognitive radio and surveillance beyond the capabilities of swept spectrum and vector signal analysis.
Digital RF signals carry complex modulation and change from one instant to the next, hopping frequencies, spiking briefly and then disappearing.
Further reading
Waveform generators keep up the pace
Tektronix has upgraded its range of arbitrary waveform generators with two new B series AWGs that offer up to 20% performance improvements over existing instruments.
DisplayPort cable testing becomes official
Methodology eliminates the need for expensive and complicated instruments promoted by alternative solutions.
Preprocessor enables next-gen memory testing
Interposer is designed for use with Tektronix TLA7000 series logic analysis systems to enhance the debug of 1333 DIMM cards.
These transient and time varying transmission techniques help RF devices avoid interference, maximise peak power and, oftentimes, evade detection.
Test instruments for digital RF require wide bandwidth with high dynamic range, fast signal capture, and the ability to fully correlate the time, frequency, and modulation domains.
The first offerings in the new RSA6100A series of real-time spectrum analysers - the 6.2GHz RSA6106A and 14GHz RSA6114A - provide industry-leading 110MHz real-time bandwidth simultaneous with 73dB spurious-free dynamic range.
The RSA6100A series provides world-class capabilities ideally suited to the needs of a broad range of digital RF applications, from power amplifiers for advanced cellular radios to the latest pulsed radar signal.
"The combination of exploding technical capabilities brought about by digital RF combined with an equal increase in demand for more functionality and mobility has created unprecedented innovations in wireless communications", said Rick Wills, CEO and Chairman, Tektronix.
"Tektronix recognised several years ago that digital RF creates a highly complex technical environment and the emerging need for test tools whose capabilities mirror the time-varying nature of today's signals".
"The RSA6100A series of Real-Time Spectrum analysers are the most capable and effective instruments available for solving even the most demanding digital RF test challenges".
"Tektronix' Real-Time Spectrum analysers are the first and only analysers designed specifically to solve digital RF problems", said Rick King, Vice President, Real-Time Spectrum analyser product line, Tektronix.
"The RSA6100A Series is the first RF analyser to simultaneously deliver 110MHz real-time bandwidth and 73dB spurious-free dynamic range, enabling the design of advanced and next generation RF systems with wide capture bandwidth and no sacrifice in dynamic range".
"The live RF spectrum display provided by DPX waveform image processing provides engineers a view into signal instabilities and transients that they never knew existed".
"The RSA6100A is a perfect fit for the measurement needs of digital RF and will become a fundamental test instrument fuelling the expansion of wireless communications".
"Many new and emerging applications need to detect and analyse RF signals that quickly change frequencies or use complex modulation techniques", said Dr Jeff Reed, Virginia Tech University.
"Traditional instruments often cannot adequately perform the measurements needed for these applications, requiring home grown solutions that are often expensive and inefficient".
"Tektronix has addressed these problems by adding robust capabilities for the time domain through its RSA family of real-time spectrum analysers".
"This ability of the RSA instruments to fully correlate the time, frequency, and modulation domains has been very useful in our work with software defined and cognitive radio development".
"The additional bandwidth and dynamic range plus the unique real-time presentation of live RF signals make the new RSA6100A Series very attractive".
DPX waveform image processor technology displays the live spectrum by processing more than 48,000 spectrum measurements per second.
This is orders of magnitude more information than is shown by any other spectrum analyser, minimising the analysis gaps inherent in swept spectrum and vector signal analysers.
This compares to a maximum of 50 spectrums per second for all other analysers.
To achieve over 48,000 spectrum measurements per second, DPX makes use of dedicated, real-time hardware to process the incoming signal.
By minimising the signal gaps, the RSA6100A provides users with a live RF signal view, unlike anything they have ever seen.
This is achieved with a 100% probability of intercept for signals as brief as 24us.
In addition to live RF, the waveform image processor also provides an intensity graded display to show the history of occurrence for dynamic signals and immediate feedback on signal variations over time.
This provides engineers the ability to rapidly see on screen both transients and signals that ordinarily could not be seen, either because they are masked by other signals or could only be deduced after time consuming offline analysis.
"For TelASIC, a supplier of radio subsystems for HSDPA, EVDO and WiMAX basestations, demonstrating that linearisation techniques for designing highly efficient power amplifiers do not cause any violations of spectral emission mask and adjacent channel power ratio specifications is difficult and critical", said Ashis Khan, Vice President of Sales and Marketing for TelASIC.
"Demonstrating no SEM/ACPR violations required that TelASIC develop a complete test environment using the Tektronix RS6100A".
"The RSA6100A series real-time spectrum analysers with live RF presentation easily revealed complete spectrum details, dramatically simplified our testing and demonstrated clear results".
"The live RF spectrum technology provided by DPX waveform image processing offers a level of insight and diagnostic capability never seen before on spectrum analysers", said Galen Wampler, President, Prime Data.
"The performance specifications of the RSA6100A are industry-leading and the ability to capture transient information is compelling".
"The RSA6100A is able to display signals and transients that no other instrument can show and is ideal for RF engineers who need to look for hidden, intermittent or infrequent signals".
"The RSA6100A series will foster new digital RF applications and transform the performance and capability expectations of engineers for spectrum analysers".
Tektronix User Experience designers researched spectrum analyser usage and customer needs to determine requirements for the RSA6100A series.
Based on this research, the RSA6100A provides a measurement-centric user interface that is designed to be intuitive and seamless, enabling engineers to focus on their analysis of the signal without worrying about the configuration of the instrument.
The UI is easy to use by traditional RF designers as well as by digital signal processing experts.
The measurement-centric interface of the RSA6100A includes default settings for each of the particular measurements, optimising the instrument for the primary measurement being performed.
These intelligent presets speed set-up and measurement time, but the engineer still has the ability to manually override the settings for added control if needed.
The RSA6100A also provides engineers a 10.4in XGA touch screen display, mouse/keyboard and conventional front panel controls.
Microsoft Windows XP reduces the learning curve for those new to making RF measurements and streamlines operations.
Introduction of the Tektronix RSA6100A series denotes a new era in spectrum analysis with its unmatched combination of real-time performance, capture bandwidth, dynamic range and unique live RF.
The RSA6100A provides engineers with a single spectrum analyser that is designed to solve the needs of a broad range of traditional and cutting-edge digital RF applications. Request a free brochure from Tektronix ...
• Tektronix: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
