Product category: DC/DC Convertors
News Release from: SynQor Europe | Subject: PowerQor Tera 52.5V
Edited by the Electronicstalk Editorial Team on 28 September 2004
Half-brick convertor powers up Ethernet
A new single-output isolated DC/DC convertor is ideally suited for power over LAN, IP telephony and isolated bus voltage applications.
A new single-output isolated DC/DC convertor is ideally suited for power over LAN, IP telephony and isolated bus voltage applications The standard half-brick module is part of the PowerQor Tera series and is capable of delivering 200W of output power at 52.5V
This article was originally published on Electronicstalk on 8 May 2001 at 8.00am (UK)
Related stories
60W dual-output convertor needs no heatsink
DualQor dual-output industry-standard quarter-brick-sized isolated DC/DC convertors from SynQor are capable of delivering up to 60W at 5 and 3.3V, with no need for an attached heatsink.