Product category: Communications ICs (Wired)
News Release from: STMicroelectronics | Subject: STB0899
Edited by the Electronicstalk Editorial Team on 6 January 2005
Demodulator supports latest DVB-S2 specification
ST now offers STB manufacturers all the major components of a DVB-S2 set-top box, including silicon tuner, demodulator and a wide range of MPEG-2 decoders
The latest addition is the STB0899 demodulator that supports both the latest DVB-S2 specification which provides increased capacity to enable more channels and HDTV capability in next generation satellite services and the original DVB-S standard used over the last ten years by satellite operators worldwide.
This article was originally published on Electronicstalk on 6 January 2005 at 8.00am (UK)
Related stories
Mobile audio device integrates power management
High-performance DAC meets the increasing demand for mobile music handsets to provide higher audio quality coupled with longer playing time
Temperature sensors suit low-power applications
STxx75 temperature sensors suit any control application where a processor with an I2C bus/SMBus needs to take action based on an accurate digital reading of the local temperature
The dual standard capability means that STB manufacturers can incorporate the STB0899 now in 'DVB-S2-ready' set-top boxes, to provide a seamless upgrade path for consumers as services become available.
DVB-S2 increases the capacity of satellite communications links by 30% compared with the DVB-S standard close to the theoretical performance limit and in combination with other new coding and satellite technologies will enable the effective deployment of high data-rate applications such as HDTV (high definition TV), broadband Internet and interactive services, as well as a significant increase in the number of standard channels that can be broadcast in a conventional transponder.
Interactive services in particular are expected to show substantial growth in the coming years.
The new demodulator is designed to integrate seamlessly with silicon tuners such as ST's STB6100, which replaces complex traditional discrete tuner circuitry and eliminates the need for specialist RF design expertise.
For downstream processing the STB0899 also offers a cost-saving glueless interface to ST's broad range of MPEG-2 and H.264 decoders in the Omega family.
Further reading
Bluetooth/FM radio combination suits mobile phones
The integrated short-range FM R(B)DS transmitter (TX) allows users to enjoy stored music content on any in-car or home FM radio tuner
Motor controller takes charge of HDDs
Controller integrates all circuits required to drive both spindle and voice-coil motors, plus the motor drive power FETs and multiple high-efficiency voltage regulators
Compact DAC offers easy installation
Integrated power management and a built-in 50mW 'true-ground' headset amplifier reduce the system footprint and ease system implementation
ST now offers STB manufacturers all of the major silicon components of a DVB-S2 set-top box.
The STB0899 is built using a state-of-the-art 90nm process technology, ensuring lower cost through the need for a smaller sized die, and reduced power consumption; additional software-based power management features are built in to help STB manufacturers obtain green accreditation.
It supports normal QPSK (quadrature-phase-shift-keying) and 8PSK modulation, as well as the DVB-S2 pilot processing that enables more robust reception.
Support is provided for the DiSEqC 2.0 (Digital Satellite Equipment Control) specification, a widely used protocol that allows a satellite STB to control peripheral devices connected to the coaxial cable.
Extensions to the DiSEqC open standard were recently proposed by ST, and adopted by the industry, that enable the STB to manage the rooftop LNB (low-noise block) downconvertor and simplify installations needing to handle more than one signal.
Up to eight input signals can be combined onto a single coaxial cable.
ST was closely involved with the DVB (Digital Video Broadcasting) technical groups working to optimise the DVB-S2 specification, and in May 2004 announced the development of a modulator design for broadcast equipment which it is licensing to manufacturers working with the new standard, to enable them to introduce equipment capable of broadcasting DVB-S2 signals and so to 'kick-start' the market for DVB-S2 services and receivers.
'ST's DVB expertise spans both broadcast technology and set-top box receivers', said Christos Lagomichos, General Manager of ST's Home Entertainment Group.
'The STB0899 is the final piece of the receiver jigsaw'.
'ST now offers manufacturers a complete family of DVB-S2 chips for all the main STB functions, including tuner, demodulator and a range of back end decoders'.
'Our customers can bring products to the market now that are ready for the new standard as it's introduced by the satellite operators, and can respond to demands from consumers to maximise their investment in home entertainment systems'.
The DVB-S standard now used by satellite operators worldwide for television broadcasts and data transmission was first ratified in 1994.
The DVB-S2 specification which was finally agreed by the technical groups in the spring of 2004 benefits from developments in channel coding and modulation to provide a 30% increase in capacity; very close to the so-called 'Shannon limit' which describes the maximum possible efficiency of the error-correcting methods.
As well as the normal QPSK (quadrature-phase-shift-keying) modulation of DVB-S, DVB-S2 allows for 3bit per symbol using 8PSK modulation, at approximately 80Mbit/s information rate, with low density parity check (LDPC) as the forward error correction code.
The STB0899 is priced at US $12 when purchased in large volumes, packaged in a 100-pin exposed pad quad flat pack (QFP), and is available in sample quantities, with volume production planned for Q1 2005.
• STMicroelectronics: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page