DIN connectors have all applications covered: News from In2Connect

Note: Readers of the Editor’s free email newsletter will have read this news when it was announced. . It’s free!

The CECC-approved DIN EN60603-2 (DIN41612) Series from In2Connect is ideal for electronics equipment requiring reliable, yet inexpensive circuit board interconnection. Available in Classes I, II and III, versatility is further enhanced by: a choice of between 15 and 96 press-fit (DIN41611 Part 5) or solder contacts; standard and reverse DIN options; mixed layout; and full or partial contact loading. Dual leaf socket contacts ensure reliability, and protective "first mate last break" premate contacts and screw machined boardlocks can be included.

The DIN41612 and sister series DIN41617 are suitable for a wide range of applications.

Many bus systems use a common signal circuit which is "daisychained" through a succession of daughtercards.

This can create problems when "active" cards have to be removed from a system, because the signal path is broken and needs to be "jumpered" on the backplane.

An elegant and simple solution lies in the integration of a mechanical switching function into the connector.

This technique is not restricted to VMEbus, or pin in row switching.

A switching function can be placed between two adjacent pins in any B or C series full or half DIN connector, as well as between pins in parallel rows, thus providing solutions in Ethernet hubs and other networking applications In2Connect offers a range of VMEbus female connectors in styles B and C with integrated, custom configured switching functions.

• In2Connect: contact details and other news
• Other news in PCB Connectors
• Email this news to a colleague
•
• RSS news feed for In2Connect
• RSS news feed for PCB Connectors
• Electronicstalk Home Page

News Release from: In2Connect
Edited by the Electronicstalk Editorial Team on 17 June 2003

DIN connectors have all applications covered

The CECC-approved DIN EN60603-2 (DIN41612) Series is ideal for electronics equipment requiring reliable yet inexpensive circuit board interconnection.

Note: Readers of the Editor’s free email newsletter will have read this news when it was announced. . It’s free!

News Release from: In2Connect Edited by the Electronicstalk Editorial Team on 17 June 2003

DIN connectors have all applications covered

The CECC-approved DIN EN60603-2 (DIN41612) Series is ideal for electronics equipment requiring reliable yet inexpensive circuit board interconnection.

Note: Readers of the Editor’s free email newsletter will have read this news when it was announced. . It’s free!

News Release from: In2Connect
Edited by the Electronicstalk Editorial Team on 17 June 2003