Turbo-Coat gives full-cure coating in 10 minutes

The Turbo-Coat, which is used to coat electronic assemblies, dries tack-free in three minutes, allowing manufactures to handle boards in one-third of the time of commonly used acrylic coatings.

Full cure can be achieved in 10 minutes with elevated temperatures.

Turbo-Coat can be either sprayed or brushed, or boards can be dipped directly into the coating for a thicker layer of protection in a single pass.

Because of its low viscosity (averaging 20cps), Turbo-Coat can generally be used in an automated spray system without the risk of cob-webbing.

Turbo-Coat greatly facilitates fast and easy production, re-work and repair by its easy workability and by the inclusion of a UV indicator to speed up black light QC inspection.

Turbo-Coat acrylic conformal coating does not contain chemicals listed under SVHC (Substances of Very High Concern), defined by the European REACH (Registration, Evaluation, Authorisation and Restriction of Chemical substances) directive; nor HAPs (Hazardous Air Pollutants), which are defined by the US EPA (Environmental Protection Agency).

Turbo-Coat acrylic conformal coating complies with IPC-CC-830 and MIL-I-46048C standards.

Turbo-Coat has achieved a V-0 rating, tested under the UL94 flammability standard, the testing standard set by UL (Underwriters Laboratories).

Conformal coating of electronic assemblies offers protection for industries such as automotive, aviation, consumer electronics, domestic appliances and industrial meters and controls.

Back to top