High performance integrated circuits
Click on the advert above to visit the company web site

Product category: Power Supply ICs and Controllers
News Release from: Intersil | Subject: EL7530 and EL7531
Edited by the Electronicstalk Editorial Team on 24 May 2004

Regulators integrate their own FETs

Register for the FREE Electronicstalk email newsletter now! News about Power Supply ICs and Controllers and more every issue. Click here for details.

Two new single-chip synchronous buck DC/DC regulators from Intersil Corp feature integrated power FETs

The EL7530 and EL7531 are targeted at digital cameras and other portable products including USB devices, PDAs and test instruments powered from a single Li-ion or multiple NiMH or alkaline battery cells. The devices operate and switch automatically from pulse frequency mode (PFM) to pulsewidth modulation (PWM) mode to offer outstanding efficiency over the full low- to high-load-current range.

The devices represent the forth generation of general-purpose PFM/PWM regulators from Intersil and offer an excellent regulation solution complementing Intersil's other lithium ion battery management ICs.

Features include improved efficiency, lower minimum input voltages, and increased continuous output power capability.

The tiny 0.145in2 total footprint and high 94% efficiency makes these regulators ideal for powering space-critical applications in portable, battery-operated devices.

With only 120uA quiescent current in PFM mode and internal soft-start, they provide the performance required for the standby mode and inrush current conditions for a variety of USB-powered applications.

Using an integrated oscillator, the EL7530 and EL7531 operate at a high 1.4MHz switching frequency, thus needing smaller inductors and external components than do other regulators.

Additionally, a sync pin allows for synchronisation to an external clock at up to 12MHz, enabling placement of the switching noise outside of bands critical to the application.

Intersil's EL7530 and EL7531 deliver 600mA and 1A continuous output current, respectively, and operate from input voltages of +2.5 up to +5.5V over an ambient temperature range of -40 to +85C.

The devices are available in a compact MSOP10 and 3 x 3mm DFN10 packages and require only eight components to provide a complete DC/DC step-down (buck) convertor.

A simple resistor divider sets the output voltage from a minimum of 0.8V to a maximum of nearly the input voltage.

Other features include a shutdown mode in which the device only draws 1uA of supply current, an external enable control to turn the device on or off, and a "power good" output signal, which can indicate to another IC that the supply voltage has reached the desired level.

Applications include USB-connected Wi-Fi modems, handheld scanners, and handheld communication devices.

With integrated output FETs and internal compensation, these devices make it extremely easy to design a robust and efficient power supply.

In addition, Intersil offers its customers a high degree of applications support, along with demo boards, sample parts, and technical assistance to ensure that customers achieve the maximum performance and most cost-effective solution possible.

Intersil: contact details and other news
Email this article to a colleague
Register for the free Electronicstalk email newsletter
NEW
Electronicstalk Home Page

Related Business News

Applications/Solutions
High-performance analog ICs provide efficient, compact and dependable solutions for engine management systems, body electronics and comfort systems.

Taiwan stocks end down in biggest...
...drop in over 1 yr. Taipei, July 27 (Reuters) - Taiwan shares fell 4.22 percent on Friday to their lowest close in three weeks, marking their largest one-day percentage drop in more than a year, after a sell-off on Wall Street hurt big exporters such as TSMC .

Nippon Oil Aug refining seen flat, eyes Sudan crude
Tokyo, July 27 (Reuters) - Japan's top oil refiner Nippon Oil Corp. will keep its August processing volumes steady versus a year ago to meet summer gasoline demand and is seeking more Nile Blend crude to meet higher utility use.

Fluor Gains Eastman Chemical Gasification Plant Feed Work
Fluor Corporation announced today that it was selected by Eastman Chemical Company to provide front-end engineering and design work for a $1.6 billion gasification project along the Texas Gulf Coast.

Migao Corporation Secures Preferential Natural Gas Prices
Toronto, Ontario-- - Migao Corporation , a leading producer of specialty potash fertilizers for the Chinese market, is pleased to announce that it has negotiated preferential natural gas prices in Sichuan Province from China Petroleum & Chemical Corpora

Search the Pro-Talk network of sites

High performance integrated circuits