Product category: AC/DC Power Supplies
News Release from: HiTek Power | Subject: XR150
Edited by the Electronicstalk Editorial Team on 18 October 2006
Power supply meets X-ray demands
Modular 150W power supply meets the exacting demands of today's high-performance industrial X-ray systems
HiTek Power has introduced the XR150 high-precision X-ray power supply. This modular unit is rated at 150W and meets the exacting demands of today's high-performance industrial X-ray systems because of its low output ripple, high-accuracy filament monitoring and control, as well as an extremely stable beam-current loop.
This article was originally published on Electronicstalk on 18 October 2006 at 8.00am (UK)
Related stories
X-ray power supplies come together
X-ray power supplies offer maximum output voltages up to 90kV and are offered in variants that can be powered from the mains or a DC input
The XR150 is rated at -60kV and 2.5mA.
It incorporates a 5V 4A floating filament supply and beam-current control.
Supplied from a 24V DC rail, it features output ripple of less than 100V peak-to-peak on the high voltage output.
The temperature coefficient for voltage and beam current is less than 100ppm/C over the operating temperature range, while temperature drift for voltage and beam current is +/-0.1% of rating over an 8 hour period after 30 minutes warm-up.
The current monitor on the filament supply provides a signal of 0 to 5V +/-0.5% +/-20mV for an output of 0 to 4A.
An RS232 interface can also be added as an option.
• HiTek Power: contact details and other news
• Email this article to a colleague
• Register for the free Electronicstalk email newsletter
• Electronicstalk Home Page
Search the Pro-Talk network of sites
