Connector modules support high-speed I/O
A Fujitsu Components Europe product story
Edited by the Electronicstalk editorial team May 22, 2006
Fujitsu Components Europe has released the first in a series of new connector modules for 4x I/O to support high-speed signal transmission.
Fujitsu Components Europe has released the first in a series of new connector modules for 4x I/O to support high-speed signal transmission.
The new modules offer a compact, cost-efficient way to increase I/O port density and available printed circuit board space, while simplifying high-speed signal routing on the main PCB.
The first module in Fujitsu's Multi-IO microGiGaCN series is the FCN-268Y032-A.
This is a 2x2-stacked module of four, 4x links that meets InfiniBand, InfiniBand DDR, 10G Fibre Channel and 10GBase-CX4 datarates in a four-channel, bidirectional data-transfer mode.
The module is designed to accommodate up to five modules (20 links) installed in a 1U configuration on a motherboard.
Each 2x2 module mounts to the PCB via a single, Fujitsu high-speed, board-to-board mezzanine connector, which is rated to 10Gbit/s.
Using only a single interface connector per module simplifies board design and reduces component count on the PCB.
In addition, the module's die-cast housing offers a robust, mechanical interface and improved EMI protection.
Options for link-status LEDs and media detect circuitry are planned on future versions.
The FCN-268Y032-A has a 30V AC rating and 240mohm contact resistance (signal), 180mohm (ground).
When mated, it has a differential characteristic impedance of 100ohm +/-10% with 100ps rise time.
Not what you're looking for? Search the site.
Contact Fujitsu Components Europe
Tel +31-23-5560910
Request information
Other Fujitsu Components Europe stories
- Fujitsu Components releases secure power relay
Fujitsu Components Europe has released the FTR-K2G power relay for appliances that need to disconnect power in a secure way. - Fujitsu to display power relays at Electronica '08
Fujitsu will display a selection of new relays at Fujitsu Electronica 2008. - Fujitsu shortens production cycle with the FTR-K1
Fujitsu is offering the FTR-K1 tab terminal, shortening the production cycle in relays by combining activities. - Latching power relay saves on three fronts
The JSL uses a Fujitsu developed highly efficient magnetic circuit, with a powerful permanent magnet, which allows reductions in size, weight and power consumption. - Printers cover full spectrum of applications
Fujitsu thermal printer mechanisms can be found in many day to day applications such as cash registers, offices, car parks, trucks and POS terminals.
Categories
- Active Components (12,004)
- Passive Components (2,985)
- Design and Development (9,429)
- Enclosures and Panel Products (3,257)
- Interconnection (2,861)
- Electronics Manufacturing, Production, Packaging (3,073)
- Industry News (1,907)
- Optoelectronics (1,633)
- Power Supplies (2,320)
- Subassemblies (4,593)
- Test and Measurement (4,990)
