Click on the advert above to visit the company web site

Product category: Stand-Alone Instruments
News Release from: TTi (Thurlby Thandar Instruments) | Subject: HA1600 and AC1000
Edited by the Electronicstalk Editorial Team on 11 April 2003

Budget package covers
full harmonics and flicker

Register for the FREE Electronicstalk email newsletter now! News about Stand-Alone Instruments and more every issue. Click here for details.

The HA1600 and AC1000 combine to form a complete solution for in-house compliance-quality measurements of current waveform harmonics and flicker as required by EN61000-3-2 and EN61000-3-3

The new HA1600 and AC1000 from TTi (Thurlby Thandar Instruments) offer a complete solution for in-house compliance-quality measurements of current waveform harmonics and flicker as required by EN61000-3-2 and EN61000-3-3. Since the 1st January 2001, EN61000-3-2 has required the measurement of the harmonic current produced by most electrical and electronic equipment.

Certain types of equipment also require testing to EN61000-3-3 (flicker testing).

Compliance is a mandatory part of CE marking.

The TTi solution comprises two units: the HA1600 mains and harmonics analyser with built-in flicker meter, and the AC1000 low-distortion AC power supply.

The two units can be supplied with a variety of mains connectors to suit different national standards.

The HA1600 has a 16A current capability, and uses a shunt resistance of 3mohm as defined by the standard.

The large backlit LCD display provides both graphical and numeric displays.

An RS232 interface is incorporated, as well as isolated monitor outputs which provide re-constructed voltage and current signals.

The instrument provides numerical and graphical analysis of mains harmonics from the 1st to the 40th to very high accuracy, and can make compliance quality measurements to EN61000-3-2.

Harmonics can be displayed as lists or as histograms, with the compliance limits automatically calculated and displayed.

Simple pass/fail analysis can be done, or detailed failure information can be rapidly extracted.

The fast update rate allows real-time monitoring of circuit changes.

The HA1600 is capable of continuous real-time analysis of both voltage and current.

As a general-purpose mains analyser, it can measure watts, volt-amperes, RMS voltage, peak voltage, RMS current, peak current, crest factors, total harmonic distortion, power factor, frequency and inrush current with a continuous rating of 16A RMS.

As a flicker meter, the HA1600 can perform simultaneous full analysis of voltage variations, including the calculation of the maximum value, the difference between steady states, and the change characteristic as required by EN61000-3-3.

The AC1000 is a 1kW power source which removes distortions from the AC mains waveform to provide a pure sinusoidal source as required by the standard.

It is rated up to 1000VA for 230V operation, and has a continuous current rating of 4.4A and a peak current rating of 10A.

In contrast to products which use a passive filtering approach, it uses an innovative technique which actively corrects the AC supply to produce a harmonically pure output.

The HA1600 and AC1000 package costs GBP 1585 (plus VAT) in the UK.

TTi (Thurlby Thandar Instruments): contact details and other news
Email this article to a colleague
Register for the free Electronicstalk email newsletter
NEW
Electronicstalk Home Page

Related Business News

Ni Labview Real-time Now Targets Wind River Vxworks Rtos
National Instruments has extended the NI LabVIEW graphical programming environment to now target the Wind River VxWorks real-time operating system , which has been deployed in more than 350 million devices worldwide including the lat

Keithley intros 6.5-digit USB digital multimeter
Keithley Instruments Inc. has released the Model 2100 6.5-digit USB digital multimeter (DMM), a high precision, low-cost USB-based instrument.

Taiwan stocks end down in biggest...
...drop in over 1 yr. Taipei, July 27 (Reuters) - Taiwan shares fell 4.22 percent on Friday to their lowest close in three weeks, marking their largest one-day percentage drop in more than a year, after a sell-off on Wall Street hurt big exporters such as TSMC .

Nippon Oil Aug refining seen flat, eyes Sudan crude
Tokyo, July 27 (Reuters) - Japan's top oil refiner Nippon Oil Corp. will keep its August processing volumes steady versus a year ago to meet summer gasoline demand and is seeking more Nile Blend crude to meet higher utility use.

Fluor Gains Eastman Chemical Gasification Plant Feed Work
Fluor Corporation announced today that it was selected by Eastman Chemical Company to provide front-end engineering and design work for a $1.6 billion gasification project along the Texas Gulf Coast.

Search the Pro-Talk network of sites